AliMed^® AliPlast^™ XPE

AliMed® AliPlast™ XPE is our firmest-grade thermoplastic foam with a 68 durometer (Shore A) firmness level. Well-suited for constructing long-lasting functional foot supports, including custom insoles, posting orthoses, and rigid splints. Lightweight and abrasion-resistant with a firm, dense, pebbly surface. Cross-linked, closed-cell polyethylene foam is heat-moldable with an impervious surface that won't absorb perspiration, bacteria, or odors. Tough, durable, and easy to clean. Available in three heights: 3/16", 3/8", or 9/16", and sold by the sheet or 10 sheets per case.

Sheet: 29"W x 32"L, Ivory

Physical Properties of AliPlast XPE: Oven Temperature (°F): 325 • Density (lbs./cu. ft.): 12 • Tensile Strength (PSI): 240; 20 in./min. (PSI): N/A • 25% Compression: 50 • 50% Compression: N/A • 75% Compression: N/A Permanent Set (%), 50% compression for 24 hrs./24-hr. recovery: 5 • Service Temperature (°F): -110 to +200

About AliMed® AliPlast™: When heated, AliPlast softens in minutes and can mold and form around any shape. When cool, it regains its original cushioning and rigidity. Softer varieties can be molded directly to the body while firmer styles are better molded first to a plaster cast to avoid danger of burns. When surfaces of two heated pieces are brought together, a permanent bond will result. AliPlast can be vacuum-formed and is auto-adhesive. Polyolefin base creates a uniquely durable bond with polyethylene or polypropylene and can be used to adhere these difficult-to-bond materials together, saving considerable time and effort when forming orthotics. AliPlast shrinks along the grain when heated, and its thickness increases. To compensate for shrinkage, stretch the material during molding. Chemically inert, hypoallergenic, and safe for virtually any orthotic or prosthetic application.